Model FT2
101364
Note: When the flow rate exceeds the maximum frequency set point, the output will stay at that
maximum frequency but the FT2 will issue an alarm code.
4.1.5.
Discrete Input/Output
To program the discrete input or output, press
I/O (F1)
key from the base menu
SET I/O
I/O FEQ 420 EXIT
F1
F2
F3
F4
Then
press
I/O (F1)
again:
SET I/O
COM CTC EXIT
F1
F2
F3
F4
Then
press
CTC (F2)
to select contact input/output
CONTACTS
INP ALM EXIT
F1
F2
F3
F4
4.1.5.1.
For Discrete Input Settings:
Press
INP (F1)
key to select input, then menu will display:
INP = Not Used
NXT OK
F1
F2
F3
F4
Press
NXT (F1)
repeatedly until the correct selection is shown and then press
OK (F4)
to
accept the setting.
Selections are: Not used
Tot Reset
to reset the totalizer
Switch Crv
Multi Curve Option Only
Page 32
Fox Thermal Instruments, Inc., 399 Reservation Road, Marina, CA 93933
