Model FT2
101364
Press
YES (F1)
ONLY
if you want to reset the CRC and generate a new CRC value.
RESET CRC?
YES NO
F1
F2
F3
F4
4.1.15.
Simulation
This menu allows for the simulation of flow rate, temperature and flow input voltage. It should
only be used for testing and demonstration purposes.
Make sure to return all of these simulation values to zero, before returning to
the normal mode of operation.
Note: Simulated values are only enabled when not set to zero.
Caution:
If the 4 to 20 mA and/or the pulse outputs are connected to controllers, set the controllers to
“manual”. This will ensure that the simulated signals do not cause false controller action.
The menu is accessible from the main programming menu by pressing
FLO
, and
SIM
:
FLOW PARAMETER 1
SIM UNT PRM EXIT
F1
F2
F3
F4
Pressing
SIM (F1)
will show:
FloSim = 0 SCFM
CHG OK
F1
F2
F3
F4
Enter the value and then press
OK (F4)
.
Note: Enter zero to disable this feature.
TmpSim = 0 C
CHG OK
F1
F2
F3
F4
Enter the value and then press
OK (F4)
.
Note: Enter zero to disable this feature.
Page 44
Fox Thermal Instruments, Inc., 399 Reservation Road, Marina, CA 93933