Owner’s Manual Page
Weather Covers - Section O
Moisture, dirt, chemicals from industrial fallout, heat,
ultraviolet rays and in some cases, salt water are
factors which affect the longevity of acrylic covers.
See Figure O13.
1. Moisture can cause shrinkage and mildew. Allow
the cover to dry thoroughly before disassembling
tops. Keep it clean and well ventilated to prevent
mildew. Spraying the weather cover with Lysol
Disinfectant™ or similar product will help prevent
mildew.
Figure O12: Carbon Monoxide Warning Label
O - 8 WINTER STORAGE
The boat must be properly protected during winter dry
dock storage. A winter storage cover is advisable.
Many marine dealers offer shrinkwrap enclosures for
outdoor storage. See a Four Winns dealer for informa-
tion on the availability of winter storage covers or other
alternatives for storage.
When storing outdoors, make sure the supporting
framework keeps the weight of the snow and rain from
accumulating on the storage cover. Proper ventilation
must also be provided or dry rot and mildew will occur.
See Section R - General Maintenance for additional
winter storage information.
O - 9 MAINTENANCE
Figure O13: Canvas Care & Maintenance Tag
2. Dirt creates a starting point for mildew when mois-
ture is present. Clean the top with a sponge or soft
scrub brush and mild detergent when the cover is
installed. Make sure cover is snug to help prevent
shrinkage.
3. Chemicals cause decay if allowed to accumulate
for long periods of time. Keep the cover clean to
prevent decay.
4. Heat can cause cracks in vinyl components and
stiffening of fabric when enclosed in plastic or
polyethylene. DO NOT store the weather cover in
polyethylene under direct sunlight or high tempera-
ture situations.
5. Ultraviolet degradation may occur under prolonged
exposure to direct sunlight. Store the top in the
boot when not in use.
6. Salt water can corrode brass, aluminum, or
stainless steel fittings and fasteners. Keep fittings
clean, lubricated, and waxed to prevent corrosion.
Clear vinyl curtains and windows demand extra care
to prevent scratching. Hose clean water onto vinyl to
rinse off salt, dirt, or grime prior to using a soft, clean
cloth. Dirt or grit in the cloth will scratch the vinyl
window. Be sure to rinse cloth often.
NOTICE
DO NOT use hot water. DO NOT dry in an
automatic dryer. DO NOT dry clean or steam
press.
Leakage after cleaning may be the result of insuffi-
cient rinsing. Re-rinse. If leakage continues, apply a
coat of silicone air drying water repellent, such as
Scotchguard™. See your Four Winns dealer for
additional information on weather covers.
Summary of Contents for 258 VISTA
