background image

To unfold stroller:

1.

  Lay stroller on floor with front wheels and front

  footrests down, contacting the floor 

(Fig. 1)

.

   

NOTE: 

Always check that floor is clean 

     

and dry before laying stroller on 

     

floor.

2.

  Lock parking brake.

3.

  Locate 

Fold Retention Strap

 on one side 

  of the stroller 

(Fig. 1)

. Push down on stroller 

  handle and unhook 

Fold Retention Strap

 

  by pulling up on the loop (1) and 

  then turn (2) and slide the loop 

  through the 

“D” Ring

 (3)     

     

(Fig. 2 and 3)

.

4.

  Repeat step 2 on opposite side 

  to unhook 

Fold Retention Strap

.

Unfolding and Folding Stroller:

Fig. 1

Fig. 2

Fold

Retention 

Strap

“D” Ring

Loop

“D” Ring

Style May Vary

WARNING

1

Loop

Stroller Operation and Use

Fig. 4

Rear

Basket 

Tube

Fig. 3

5.

  Pull up on handle to unfold the stroller 

(Fig. 3)

  and then with a quick snap, push down on 

  handle to lock in unfolded position 

(Fig. 4)

.

     Push down on side frame to ensure stroller is      

     in locked open position. 

  Lift on handle to check that stroller handle 

  is locked in the unfolded  position on both 

  sides.

Unfolding and Folding Stroller

9

2

1

1

3

•  Pinch Hazard - Keep hands clear of moving parts during assembly,

  folding and unfolding.

•  Ensure that all the locking devices are engaged before use.

Summary of Contents for 4141079
















Reviews: