7
STEP 5 - Canopy Assembly
To attach canopy:
1.
Position canopy with rounded front section on top
and place canopy in rear seat area and over top
of front seats.
2.
Secure
Main Canopy Tube
(long tube) by pushing
end of
Main Canopy Tube
into
Canopy Retainer
slot
located on outside of handle near the armrest
(Fig. 1)
.
3.
Secure short
Rear Canopy Tube
(short tube) by pushing
end of
Canopy Tube
into
Canopy Retainer
slot
located on outside of the handle near the top of the
back seat
(Fig. 2)
.
Repeat steps
2
and
3
to secure canopy tubes on other
side of stroller.
4.
Secure back of canopy.
Secure canopy sides around stroller handle by
securing hook & loop fasteners on each side
(Fig. 3)
.
Repeat on other side of canopy.
Fig. 2
Rear
Canopy
Tube
Canopy
Retainer
Handle
Fig. 3
Fig. 1
Main
Canopy
Tube
Canopy
Retainer
Armrest
5.
Attach Rear Cover.
With the loop side of fabric fastener facing outwards, align cut
out in the center of the Rear Cover with the center tube of the
stroller handle. Press the hook and loop fabric fastening
together on both sides of the center tube.
Wrap each side of the back cover around the side handle tube
and press together the loop side of the Rear Cover to the Hook
side of the Main Canopy.
(Fig. 4)
Fig. 4
