Fotric 320F Series User Manual Download Page 114

Page: 114 / 123

110

2. Use an air blower to blow away the dust on the detector’s surface

! Note: in upon procedure 2, Please do not use any untainted compressed

air, such as a high-pressure air source from the workshop.

9.4 Lithium battery maintenance

Please do not leave the batteries near a heat source or fire. Avoid direct

sunlight

2. Please don’t disassembly or squish the batteries

3. If the product is not going to be used for a long time, please take out the

battery to prevent possible leakage from the battery damaging the product.

4. Please only use the FOTRIC-authorized power adaptor and charger to charge

the batteries.

5. Please keep the batteries in a clean and dry environment.

! Note: to avoid accidents, please do not expose the batteries to a heat

source or in a high-temperature environment (ex. In unmonitored cars

parked under direct sunlight)

Summary of Contents for 320F Series




























































































































Search results

Summary of Contents for 320F Series

Reviews:

Related manuals for 320F Series

Brands by name

Popular brands

Fotric 320F Series, User Manual

Search results

Summary of Contents for 320F Series

Reviews:

Related manuals for 320F Series

Brands by name

Popular brands