Fotric 320F Series User Manual Download Page 15

Page: 15 / 123

Operation guide

3.1 battery

3.1.1 battery charging

1. Use a battery charging dock to charge the battery by connecting to a USB
Type-C cable and power adaptor.

2. Or charge the battery from the USB interface of the thermal camera when it is
plugged in.

The LED indicator lamp on the front view of thermal imager:

Signal Type

Explanation

The LED indicator flashes in Green

When the power charger is
plugged in, and the battery is
not fully charged.

The LED indicator glows continuously

Green

When the charger is plugged in,
and the battery has been fully
charged.

The LED indicator lamp on the independent accompanying battery charger

Signal Type

Explanation

The LED indicator glows continuously in
red

The battery is being charged

The LED indicator glows continuously in
green

The battery is fully charged

3.1.2 Low battery warning

If the thermal camera’s battery level is below 20% when turned on, the

battery-warning window will pop up.

If the thermal camera’s battery level is below 20% during operation, the

Summary of Contents for 320F Series




























































































































Search results

Summary of Contents for 320F Series

Reviews:

Related manuals for 320F Series

Brands by name

Popular brands

Fotric 320F Series, User Manual

Search results

Summary of Contents for 320F Series

Reviews:

Related manuals for 320F Series

Brands by name

Popular brands