Fotric 320F Series, User Manual

Page: 54 / 123

50
1. Touch-screen operation
1
）
Following the instruction of 4.8.1, select the desired ROI
2
）
Drag the ROI with your finger and move it to the position. For points, you can
drag them directly; For line/rectangle/circle, press and drag on the central point.
2. On-panel operation
1
）
Following the instruction of 4.8.1, select the desired ROI
2
）
Move the ROI by pressing direction keys. For each press, the ROI will move a
pixel.
3
）
Long-press direction key will enable continuous movement, but the step
length will not increase.
ROI’s size is editable by touch-screen and On-panel operation. To move the
selected ROIs, please follow the procedures as below:
1. touch-screen operation
1
）
Following the instruction of 4.8.1, select the desired ROI
2
）
Press the corner of ROI and drag your finger. The ROI’s size will change
according to your movement.
• Point: Do not support resizing
• Line: drag the endpoints
• Rectangle
、
circle: drag on the corners
2. On-panel operation
1
）
Following the instruction of 4.8.1, select the desired ROI
2
）
Press on Left and right direction keys, to change the width of ROI (length for
line, point N/A)