88
VR800 Owner’s Manual (Changing the initial setting: SETUP mode)
<Table-3> “Execution” menu
Execution item
Display
Refer page
Community
Deleting a Program
Delete PGM ?
34
-
Editing a Program title
Title Edit PGM ?
35
-
Saving song data to an external digital device
Save PGM ?
75
-
Loading song data from an external digital device Load PGM ?
75
-
Formatting an current drive disk
Format ?
27
-
Formatting a back-up drive disk
Bk Format ?
30
-
<Table-2> “Check” menu
Check item
Display
Refer page
Community
Check of the Event number on the track.
NOs Of Event ?
105
-
Changing the Initial Settings (SETUP Mode)
SETUP mode of the VR800 offers the “Changing the initial settings” menus that configure the operating environment
of the VR800, a “Check” menu that enables you to check the number of events of each track, and the “Execution”
menus that execute certain operations, such as save and load.
The “Changing the initial settings” menus include 15 parameters as shown in Table-1 below. These parameters
were set before the unit was shipped from the factory (These values are called the “initial settings.”). Modifying
these settings allows you to change the operating environment of the VR800.
The “Check” menu provides one parameter “Checking the number of events” as shown in Table-2.
Also, as shown in Table-3, the “Execution” menus include six items: Title Edit?, Delete. PGM?, Load PGM?, Save
PGM?, and Disk Format?, which you can execute by selecting the corresponding SETUP menu. This chapter
explains how to use the “Changing the initial settings” menus shown in Table-1 and the “Check” menu shown in
Table-2. For more information on the “Execution” menus, refer to the corresponding pages in the “Reference
page” column in Table-3.
<Table-1> “Changing the initial settings” menu
Parameters
Display
Default setting
Refer page
Community
Setting a time signature
Signature Set ?
001BAR 4/4
90
Setting a Tempo
Tempo Map Set ?
001BAR 1 120
92
Setting the metronome function
Click ?
oFF
93
Setting a preroll time
Preroll Time ?
00
94
Setting MIDI sync output signal
MIDI Sync OUT ?
cLk (Clock)
95
Setting an MTC frame rate
Frame Rate ?
25 frame
96
Setting an MTC offset value
MTC OFFSET
00H 59M 57S 00F 00SF
96
Setting Offset mode
Offset Mode ?
ABS
97
Setting the slave mode
Slave Mode ?
oFF
98
Setting the slave type
Slave Type ?
VAri
99
Setting the record protect function
Rec Protect ?
oFF
100
Setting digital input tracks
Digi in ?
AdAt, ASYnC
101
Setting digital output tracks
Digi out ?
AdAt
102
Setting BAR/BEAT resolution mode
Resolution ?
oFF
103
Setting the MIDI device ID number
Device ID ?
00
104
Modes applicable program by program. They can be saved/loaded.
Modes applicable to all programs. They cannot be seved/loaded.
