www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
73
4.10 Firewall
This section explains how to control the access permission by checking the client PC’s IP addresses. It is
composed of the following columns:
Block access from these IP addresses
and
Only allow access
from these IP addresses.
Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most,
only those clients whose IP addresses listed in the
Only allow access from these IP addresses
can
access the Network Camera. If you select
Block access from these IP addresses,
only those clients
whose IP addresses are in the IP list cannot access the Network Camera.
Click
Save
to take effect.
4.11 System
In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version,
restore the camera to default settings and reboot the device.
4.11.1 Back-up & Restore
Click
Backup
to save all the parameters you have set. These parameters will be stored in a bin file for
future use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
