www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
47
internet. Take hostname
ycxgwp.no-ip.info and http NO. 2000
for example, the accessing link of the
camera via internet would be
http:// ycxgwp.no-ip.info:2000
4.4.5 UPnP
The default UPnP status is closed. You can enable UPnP, then the camera’s software will be configured
for port forwarding. Back to the “
Device Status
” panel, you can see the UPnP status:
The camera’s software will be configured for port forwarding. There may be issues with your routers
security settings, and sometimes may error. We recommend you configure port forwarding manually on
your router .
4.4.6 Port
This camera supports HTTP Port, HTTPS and ONVIF.
HTTP port:
By default, the HTTP and Media are set to 88. Also, they can be assigned with another port
number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
HTTP Port is used to access the camera remotely. If you want to access the camera and view the video,
the HTTP Port must both be configured correctly.
