Foscam FosBaby P1 User Manual Download Page 65

Page: 65 / 94

www.foscam.com

Shenzhen Foscam Intelligent Technology Co., Limited

Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

4.7 Record

This section will allow you to change the record files storage path and the record time.

4.7.1 Storage Location

On this page you can change the alarm and manually recording storage path.

Alarm Recording Location :

SD card, FTP.

Check “SD card” : The video will be saved in SD card.

Make sure the camera has been inserted the SD

card

. On this page, you can see the available space of the SD card.

Check “FTP” : The video will be saved in FTP. Please refer to "FTP settings."

Manual Recording Location:

For Windows OS, the manual recording path is C:/ IPCamRecord, you can

change another one. For MAC OS, the manual recording path is: / IPCamRecord.

4.7.2 Alarm Recording

4.7.3 Local Alarm Recording

This page you can enable the local alarm record and Local Alarm record time.

Summary of Contents for FosBaby P1































































































Search results

Summary of Contents for FosBaby P1

Reviews:

Brands by name

Popular brands

Foscam FosBaby P1, User Manual

Search results

Summary of Contents for FosBaby P1

Reviews:

Brands by name

Popular brands