Foscam FosBaby P1 User Manual Download Page 4

Page: 4 / 94

www.foscam.com

Shenzhen Foscam Intelligent Technology Co., Limited

Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

Software to manage and monitor multiple cameras



Support record schedule



Support Playing Lullabies



Motion, sound, temperature and humidity Detection via FTP and Email



Support Cloud Service, Remote access your Baby Monitor without port forwarding



Support EZlink, Link to WiFi network easily

1.2 Read Before Use

Please first verify that all contents received are complete according to the Package Contents listed below.

Before the camera is installed, please carefully read and follow the instructions in the Quick Installation

Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used

properly as intended.

1.3 Package Contents

●

Camera × 1

●

Mounting Bracket×1

●

Temperature Detection Sensor × 1

●

Watch strap × 1

●

Power Adapter × 1

●

Power Line × 1

●

Resource CD × 1

●

Quick Installation Guide × 1

●

Warning Sticker × 1

●

Warranty Card × 1

1.4 Physical Description

FosBaby

Summary of Contents for FosBaby P1































































































Search results

Summary of Contents for FosBaby P1

Reviews:

Brands by name

Popular brands

Foscam FosBaby P1, User Manual

Search results

Summary of Contents for FosBaby P1

Reviews:

Brands by name

Popular brands