manualshive.com logo in svg

Foscam FosBaby P1, User Manual

Share
Download
Foscam FosBaby P1 User Manual Download Page 68

 

     

www.foscam.com

                         

Shenzhen Foscam Intelligent Technology Co., Limited 

Tel: 86 755 2674 5668 Fax: 86 755 2674 5168

 

 

66

4.7.5  SD Card Management 

This camera supports SD Card and the max size of SD card must be under 32G. 

When you plug in the SD card during the camera work process, please reboot the camera again, or else 

the SD Card may be cannot work well. 

 

Go to the 

Settings

Status

Device Status 

page, you can see the SD card status. 

 

 

The default storage path of alarm record files is SD card, when the available size of SD card is less than 

256M, the old record files will be deleted automatically. 

 

4.8  Lullabies 

The only nursery rhyme on the machine and the lullabies of a specified coding mode in the SD card can 

be played (two lullabies is stored in the Flash for playing when no SD card is available).   

When the 

Songs Path 

is set to

 SD

, the IP camera only display five songs in the 

Music

 list.   

Summary of Contents for FosBaby P1































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands