Fortress Technologies Winner 3 Owner'S Manual Download Page 36 | Manualshive

Page: 36 / 52

background image

Adjustment options

36

5 Adjustment options

XXXXXX-010500000-en.doc

5.1

Seat adjustments

The Fortress Winner seat offers a number of adjustment options to increase
the sitting and driving comfort.

The following may be adjusted:
A.  Seat height
B.  Seating depth
C.  Backrest angle
D.  Armrests width
E.  Head rest
F.  Steering tiller

5.1.1

Adjusting the seat height

The whole seat may be adjusted in height up to a range of 3”.
This adjustment should be made by the dealer.

5.1.2

Adjusting the seat depth (sliding seat)

•

See Fig. 000000180 (seat may differ
slightly from diagram)

Adjust the seat depth as follows:

•

Pull lever (A) up and hold.

•

Slide the seat forward or back.

•

Release the handle when the seat
has reached the desired position.
Slide the seat back or forward a little
to engage the locking mechanism.
This will set the seat depth.

A

000000XX0

«
...
34
35
36
37
38
...
»

Summary of Contents for Winner 3





















































Reviews:

No comments

Related manuals for Winner 3

Brand: RACCEWAY Pages: 105

Excite 3 Galaxy

Brand: Excell Pages: 27

Brand: Sym Pages: 37

Brand: KYMCO Pages: 46

Brand: Bunch Pages: 37

Brand: Golden Pages: 29

Brand: Karma Pages: 60

Brand: LAOTIE Pages: 12

Brand: Pride Pages: 43

Brand: Jetson Pages: 40

Brand: Eco Expedition Pages: 18

Brand: MONSTERPRO Pages: 20

Brand: KOMFI-RIDER Pages: 28

Brand: Segway Pages: 2

Brand: Invacare Pages: 4

Accelerator Series

Brand: Razor Pages: 11

Brand: E-Broh Pages: 32

Brand: UUALK Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands