Fortress Technologies Winner 3 Owner'S Manual Download Page 50

Page: 50 / 52

Technical specifications

8.2

Approval

The product meets the following standards:

1. NEN-EN 12182 Technical tools for the handicapped - General standards

and testing methods October 1997.

2. NEN-EN 12184 Electrically driven wheelchairs, scooters and associated

charging equipment - Standards and testing methods April 1999.

3. The Fortress Winner scooter is classified according to EN12184 in

class C.

4. ISO 7176-8 Requirements and test methods for impact, static, and fatigue

strength July 1998.

5. ISO 7176-9 climate tests for electric wheelchairs and scooters.

6. ISO 7176-14 Standards and test methods for controller systems of

electrically driven wheelchairs 1997.

7. ISO 7176-16 Requirements of resistance to fire May 1997.

Summary of Contents for Winner 3





















































Search results

Summary of Contents for Winner 3

Reviews:

Related manuals for Winner 3

Brands by name

Popular brands

Fortress Technologies Winner 3, Owner'S Manual

Search results

Summary of Contents for Winner 3

Reviews:

Related manuals for Winner 3

Brands by name

Popular brands