Ver.3
UUALK SUN’14 - ASSEMBLING INSTRUCTIONS
1. You will receive a package like the one shown in the
picture, of dimensions: 150 cm long, 78 cm high and
26 cm wide .
2. To assemble the bike Uualk Sun'14 the following tools
are needed:
a) Scissors or cutter.
b) Allen wrench no. 4, 5 and 6
c) Monkey wrench or a flat one no. 15 .
d) Flat or star screwdriver.
3. Remove the packaging. Inside the box you will find:
a) Your bike already mounted with the battery and
the rear wheel.
b) Two pedals.
c) Front fender.
d) Battery charger.
e) Front wheel and quick lamping axis.
f) Handlebar (two battery keys attached to it).
g) Throttle lever.
h) Assembling instructions.
4. R
emove with the cutter all paper and plastic
protectors.
5. Remove the battery using the key and put it to
charge. Very important: First connect the cable to the
battery and then the charger to the electricity. To
disconnect, first disconnect the power cord and then
the battery. IT IS ESSENTIAL THAT THE FIRST
LOAD LASTS FOR 12 HOURS. Subsequent charges
will be completed when the CHARGE indicator turns
green (for 4-6 hours).
6. Remove the handlebar’s plastic protector and place
the handlebar in its axis. Screw it with the help of the
allen wrench no. 6.
7. Loosen the brake to put the fender. Holding the front
light, use the allen wrench no. 5 to unscrew the screw
and place the fender’s metal plate between the frame
and the light. This is the best way to screw the hole
combination all at once.
8. Tighten the spokes on the front wheel frame using the
allen wrench no. 4
