Log In To The Admin User Interface
Log In To The Admin User Interface
Note:
The User Name and Password for the Admin User Interface are root/YAMS. These
credentials are not changed in the Configuration Wizard. You will be prompted to change your
credentials when you log in the first time.
1.
When the results of the configuration are satisfactory, use one of the following URLs to
access the system’s graphical user interface:
http://<IP Address>:8080/
or
http://<Host Name of the appliance>:8080/
For secure port:
https://<IP Address>:8443/
or
https://<Host Name of the appliance>:8443/
2.
Enter the login credentials.
User Name
= root
Password
= YAMS
Note:
User Name and Password fields are case sensitive.
3.
Once you have logged into FortiNac review the End User License Agreement and click
Accept
to continue.
4.
On the Password screen, create a new Administrator user name and password and
click
Apply
.
5.
The Quick Start Wizard is displayed. Go through the steps to set up network access for
users on your network. Click
Help > Current View
for information on using the
software.
Important:
You must run the Auto-Definition Synchronizer scheduled task to retrieve the latest
list of Vendor OUIs and AV/AS Definition updates.
44
Summary of Contents for FortiNac BFN320
