Layer 2 Network - Configure VLANS
Field
Definition
Mask
Subnet mask.
Lease Pool
Start
End
Starting and ending IP addresses that delineate the range of IP addresses available for
unauthenticated users on this VLAN.
Domain
Domain
Identifies the domain for this range of IP addresses. To help identify the VLAN,
incorporate part of the name in the domain. For example, for the isolation VLAN use
megatech-iso.com or for the registration VLAN use megatech-reg.com.
Note:
Note: If you use agents for OS X, iOS, and some Linux systems,
using a
.local
suffix in Domain fields may cause communications issues.
Example:
Incorrect dns suffix for reg:
tech-reg.megatech.local
Correct dns suffix for reg:
tech.megatech-reg.edu
Lease Time
Time in seconds that an IP address in this domain is available for use. When this time
has elapsed the user is served a new IP address. The recommended lease time for
Access Point Management/Isolation is 60.
26
Summary of Contents for FortiNac BFN320
