Fortinet FortiGate FortiGate-5020, Administration Manual

Page: 290 / 402

290
01-28008-0013-20050204 Fortinet Inc.
Signature IPS
Custom
You can create custom IPS signatures. The custom signatures you create are added
to a single Custom signature group.
Custom signatures provide the power and flexibility to customize the FortiGate IPS for
diverse network environments. The FortiGate predefined signatures cover common
attacks. If you are using an unusual or specialized application or an uncommon
platform, you can add custom signatures based on the security alerts released by the
application and platform vendors.
You can also use custom signatures to block or allow specific traffic. For example to
block traffic containing pornography, you can add custom signatures similar to the
following:
F-SBID (--protocol tcp; --flow established; --content "nude cheerleader"; --no_case)
When you add the signature set action to Drop Session.
For more information on custom signature syntax see the FortiGate IPS Custom
Signatures Technical Bulletin .
Custom signature list
Figure 153:The custom signature group
idle_timeout If a session is idle for longer than this number of seconds, the session will
not be maintained by tcp_reassembler.
min_ttl A packet with a higher ttl number in its IP header than the number specified
here is not processed by tcp_reassembler.
port_list A comma separated list of ports. The dissector can decode these TCP ports.
bad_flag_list A comma separated list of bad TCP flags.
reassembly_
direction Valid settings are from-server, from-client, or both.
codepoint A number from 0 to 63. Used for differentiated services tagging. When the
action for p2p and im signatures is set to Pass, the FortiGate unit checks the
codepoint. If the codepoint is set to a number from 1 to 63, the codepoint for
the session is changed to the specified value. If the codepoint is set to -1
(the default) no change is made to the codepoint in the IP header.
Note: Custom signatures are an advanced feature. This document assumes the user has
previous experience creating intrusion detection signatures.
Enable custom
signature Select the Enable custom signature box to enable the custom signature
group or clear the Enable custom signature box to disable the custom
signature group.
Create New Select Create New to create a new custom signature.
Clear all custom
signatures Remove all the custom signatures from the custom signature group.