manualshive.com logo in svg

Fortinet FortiGate FortiGate-5001SX, Security System Manual

Share
Download
Fortinet FortiGate FortiGate-5001SX Security System Manual Download Page 15

Hardware installation 

Inserting a FortiGate-5001SX module into a chassis

FortiGate-5001SX   Security System Guide
01-30000-0380-20070201

15

Before inserting the FortiGate-5001SX module in a chassis

Before installing the FortiGate-5001SX module in a chassis you should verify that 
the RAM DIMMs are installed and the JP3 jumper is set correctly. You can also 
install the SFP transceivers before inserting the module.

•

“RAM DIMMs” on page 9

•

“Installing SFP transceivers” on page 11

•

“Changing FortiGate-5001SX jumper settings” on page 12

Insertion procedure

FortiGate-5001SX modules are hot swappable. The procedure for inserting the 
FortiGate-5001SX module into a FortiGate-5000 series chassis slot is the same 
whether or not the FortiGate-5000 series chassis is powered on or not.

To insert a FortiGate-5001SX module into a FortiGate-5000 series chassis

To complete this procedure, you need:

•

A FortiGate-5001SX module

•

A FortiGate-5000 series chassis with an empty slot

•

An electrostatic discharge (ESD) preventive wrist or ankle strap with 
connection cord

1

Attach the ESD wrist or ankle strap to your wrist or ankle and to an ESD socket or 
to a bare metal surface on the chassis or frame.

2

Fully loosen the left extraction lever locking screw to unlock the left extraction 
lever.

!

Caution: 

Do not carry the FortiGate-5001SX module by holding the extraction levers. 

When inserting or removing the FortiGate-5001SX module from a chassis slot, handle the 
module by the front panel. The extraction levers are designed for positioning and locking 
the FortiGate-5001SX module into a slot in a chassis only and should not be used for 
handling the module. If the extraction levers become bent or damaged the 
FortiGate-5001SX module may not align correctly in the chassis slot and the left extraction 
lever may not activate the power switch.

!

Caution: 

FortiGate-5001SX modules must be protected from static discharge and physical 

shock. Only handle or work with FortiGate-5001SX modules at a static-free workstation. 
Always wear a grounded electrostatic discharge (ESD) preventive wrist or ankle strap when 
handling FortiGate-5001SX modules.

Loosen

Left Extraction Lever

locking screw

Summary of Contents for FortiGate FortiGate-5001SX





































Reviews:

No comments

Brands by name

Popular brands

Load more brands