11
User guide
Aux 2 : Passenger side sliding door (if installed).
Press the
AUX
button (the remote LED will flash slowly), and
within 12 seconds press the
(UNLOCK)
button (the remote
LED will flash rapidly). Repeat this sequence to close the
passenger side sliding door.
Note:
The function of the auxiliary outputs may vary depending on the vehicle and the
installation. In most cases these outputs are not used, and in some cases they may be
used to control other features such as the power windows, sunroof, or heated seats.
Check with the installer to find out what AUX outputs have been installed, and what they
control.
MULTI-VÉHICLE MODE
Multi-Vehicle Mode allows you to control two vehicles with one remote transmitter. The
transmitter works normally on the primary vehicle, while the following steps describe how
to control the second vehicle.
To
Lock
the second vehicle :
Simultaneously press the
(TRUNK)
and
(LOCK)
buttons.
To
Unlock
the second vehicle :
Simultaneously press the
(TRUNK)
and
(UNLOCK)
buttons.
To
Start/Stop
the second vehicle :
Simultaneously press the
(TRUNK)
and
(START)
buttons.
77
REMOTE STARTING OPTIONS
CONFIGURABLE FONCTIONALITY DURING INSTALLATION
This Remote-Starter is designed to be highly flexible when integrating into original
equipment (OEM). With the following programmable options the Remote-Starter/Alarm
can control most electronic systems within the vehicle.
WARNING: This Remote-Starter must be installed by a trained professional.
Improper
modifications to any of the following settings could adversely affect the reliability of the
Remote-Starter and/or the vehicle’s operation.
Configurable Options:
●
Remote Door Locks
●
Active or Passive Arming
●
Ignition Door Locks
●
Security Lock
●
Trunk/Hatch Release
●
Runtime
●
Runtime Reset
●
Secure Transmitter Mode
