9
User guide
5 BUTTON FUNCTIONALITY
The functions of the buttons are described in detail within the USING THE REMOTE
CONTROL section (p.3)
2-WAY REMOTE CONTROL RESPONSE (LED AND SPEAKER)
Action
Commu-
nicating
with
The
remote-
starter.
LED
RESPONSE
SPEAKER RESPONSE
STATUS
1 Green
Flash
1beep LOCK
succeeded
LOCK
Flashing
Blue
1 Red Flash
1 low beep
LOCK failed, no
communication.
[1]
1 Green
Flash
2 beeps
UNLOCK succeeded
UNLOCK
Flashing
Blue
1 Red Flash
1 low beep
UNLOCK failed, no
communication.
[1]
1 Green
Flash
1 beep
TRUNK succeeded
TRUNK
Flashing
Blue
1 Red Flash
1 low beep
TRUNK failed, no
communication.
[1]
1 beep
START/STOP
succeeded
Ascending notes
[2]
The vehicle has
STARTed.
1 Green
Flash
Descending notes
[2]
The remote-starter
failed to start or
shutdown normally.
START
Flashing
Blue
1 Red Flash
1 low beep
START/STOP failed
no communication.
[1]
NOTE [1]:
It is possible that the remote control was able to communicate with the remote-
starter and that action was performed successfully, but the remote-starter was unable to
send its response back to the remote control. Some factors such as radio interference
may interfere with the communication between the remote control and the remote-starter.
See the TRANSMITTER RANGE (p.14) and FAILED REMOTE-START (p.14)
NOTE [2]:
The response from the remote-starter may take up to 8 seconds or
longer (diesel mode).
ALARM SYSTEM (IF EQUIPPED)
If the alarm system is enabled the remote control will provide the following status
when the alarm is triggered.
LED
SPEAKER
STATUS
Flashing Red
Oscillating tone
for 20 seconds
A zone on the alarm has been triggered.
