13
Installation Guide
MODE 4 (Button 4)
Valet code: 5
MODE 5 (Button 5)
Valet code: 6
MODE 6 (Button 6)
Valet code: 7
5TH RELAY
(Option #31)
5th relay configuration.
MODE 1 (Button 1)
Disable
MODE 2 (Button 2)
Enable Latch after start
MODE 3 (Button 3)
Enable Trunk Output
GROUND OUT
(Option #32)
When the remote starter turn off, it is possible to program the Ground Out output to stay activated 1 or
3 seconds after the vehicle shut down.
MODE 1 (Button 1)
Active 1 second after shut-down
MODE 2 (Button 2)
Active 3 seconds after shut-down
NOT AVAILABLE
(Option #33)
TRUNK PULSE
(Option #34)
Trunk output configuration, 0.5 second or 2.5 second Ground pulse and ability to unlock doors before
trunk pulse.
MODE 1 (Button 1)
0.5s
MODE 2 (Button 2)
2.5s
MODE 3 (Button 3)
Unlock before
DISARM IGNITION
(Option #35)
If enabled the remote starter will simultaneously activate the ignition ON and GWR (Ground Out While
Running) output for 0.5s to disarm the vehicles OEM alarm using the immobilizer bypass.
MODE 1 (Button 1)
Disable
MODE 2 (Button 2)
Disarm with Ignition and GWR
VALET MODE ACTIVATION/DEACTIVATION
(Option #36)
Valet mode activation using the remote and/or the valet switch.
MODE 1 (Button 1)
Valet switch or LOCK+UNLOCK
MODE 2 (Button 2)
Valet switch or AUX » LOCK+UNLOCK
MODE 3 (Button 3)
Valet switch only
DOOR SECURITY SHUTDOWN
(Option #37)
Door-pin observation for protection on vehicles with proximity keys.
MODE 1 (Button 1)
Disable
MODE 2 (Button 2)
Enable, shuts down the engine if any door is opened
before UNLOCK is pressed.
