Fortin Electronic Systems FSA-208, Installation Manual

Page: 10 / 32

9
Installation Guide
MODE 4 (Button 4) Pink : Ignition
Orange : 2
nd Ignition
White : Start
Yellow : 2
nd Start
Brown : Parking (+)
MODE 5 (Button 1 and 2) Pink : Ignition
White : 2
nd
Ignition
Orange : Accessory
Brown : 2
nd Accessory
Yellow : Start
Brown/White : Parking (-)
MODE 6 (Button 3 and 4) Pink : Ignition
White : Starter
Orange : Accessory
Brown : 2
nd Ignition
Yellow : 2
nd
Starter
Brown/White : Parking (-)
CRANK TIME
(Option #3)
This programming option adjusts the length of crank time for the Remote-Starter. If the vehicle over-
cranks or under-crank, the crank time can be adjusted. This works with both tachometer wired mode,
and tachless mode.
When reprogramming option 3 (Crank time)
*-Each press of button 1 (LOCK) will gradually increase the length of crank time.
(Required when the vehicle under-cranks)
**-Each press of buttons 3 + 4 (TRUNK, START) simultaneously will gradually decrease the length of
crank time. (Required when the vehicle over-cranks)
Length of time the starter will crank.
MODE 1 (Button 1) Increase
MODE 2 (Button 2) +++++
MODE 3 (Button 3) ++++
MODE 4 (Button 4) +++
MODE 5 (Button 1 and 2) ++
MODE 6 (Button 3 and 4) Decrease
RUNTIME GAS (DIESEL) (Option #4)
The Remote-Starter runtime in minutes. (x2) in diesel mode. (See option #18)
MODE 1 (Button 1) 15 (30)
MODE 2 (Button 2) 7 (14)
MODE 3 (Button 3) 3 (6)
ALARM OPTIONS (Option #5)
Simultanously change functions #7, #9, #14 and #15.
MODE 1 (Button 1) Disable all
MODE 2 (Button 2) Enable all
LOCK AND UNLOCK AFTER START (Option #6)
This programming option allows the Remote-Starter to control the OEM alarm on some vehicles by
sending a unlock pulse before Remote-Start and an lock pulse(s) after shut-down.
By enabling this option (Mode 2), the system will unlock the door’s before Remote-Starting, and re-LOCK
the door’s after Remote-Start shut-down only if the key is not in the ignition (ON/RUN) position.
If only the LOCK option is enabled (Mode 3), the doors will not UNLOCK before Remote-Start, but will
LOCK after shut-down only if the key is not in the ignition (ON/RUN) position.
Note: The majority of OEM alarm systems will not permit the Alarm to ARM when the engine is running
(ON/RUN).
UNLOCK before Remote-Start, LOCK after Remote-Start, LOCK after shut-down.
MODE 1 (Button 1) Disable
MODE 2 (Button 2) Enable
MODE 3 (Button 3) Lock Only
MODE 4 (Button 4) Lock/Unlock after shut down
MODE 5 (Button 1 and 2) Verrouille 10 secondes après l’arrêt du démarreur
à distance