JSC FORTEZA
FORTEZA-50, 100, 200
Please visit our internet sites
:
Page 13
Fig.8.1
Fig.8.2
8.2.3
.
The supports can be mounted with concreting.
The other variants of the sensor mounting (for example on a fence, on a building wall) can be
chosen according to the results of the operation test. As a fence deforms the detection zone
configuration, the sensor operation depends on the exact place of its mounting.
The example of the supports mounting is given in fig. 8.3.
8.2.4.
Lay the main cables according to the project of the security system.
Mount the Rx and Tx brackets on the supports (see item 6.1.2). The height of the brackets (if
there is no snow) is chosen according to fig.6.1. The brackets are mounted on the supports
with two buckles (see fig.6.1).
8.2.5
.
Install Tx and Rx on the brackets with bolts 12 (fig.6.1).
ATTENTION! The right orientation of Tx and Rx on the bracket: drain ports should be
downwards!
