JSC FORTEZA
FORTEZA-50, 100, 200
Please visit our internet sites
:
Page 9
Fig.6.3
Table 6.1.
Sensor
Max detection
zone length (L),
m
Max detection
zone width (B),
m
Max detection
zone height (H),
m
Notes
FORTEZA-200
100
1,5
1,5
FORTEZA-100
100
1,5
1,5
FORTEZA-50
40
1,0
1,0
Notes.
1.
If the upper part of the fence is protected with physical protection devices, it is necessary to
use the bracket of 500 mm. If the upper part of the fence is not protected with barbed wire,
it is recommended to use the bracket of 350 mm.
2.
The height of Rx and Tx units for the protection of the fence upper part is equal to the
fence height ±100mm.
3.
The dimensions and materials of the fence are not specified. It is necessary to provide the
fence rigidity.
4.
The detection zone dimensions B and H are given for the correct alignment of the sensor
according to the item 9.
5.
The bracket of 120 mm is used if the beaming direction of the unit is perpendicular to the
support plane or if the beaming direction is within the angle range 90
± 40
.
