JSC FORTEZA
FORTEZA-50, 100, 200
Please visit our internet sites
:
Page 15
1 - support;
2 - plastic plug;
3 - hole for the cable input inside the
support;
4 - hole for the main cable and sensor
cable input;
5 - hole for the main cable input;
6 - concrete (gravel);
7 - dowels for prevention the
unauthorized dismounting of the
support;
8- ground.
Fig.8.3
Note.
1.
For A size the ground should
be laid after installation works.
2.
Dimensions are given in millimeters.
8.3.
Sensor connection
8.3.1
.
Connect
the necessary power, signal and remote control circuits. Rx and Tx units are
connected with its own cables. The colour or marking of the cable conductors indicate their
purpose.
The information about cable conductors marking, colour and purpose is given in
Table 8.1.Table 8.1
ATTENTION! It is categorically forbidden to «earth» the sensor circuits directly. It is
necessary to use the lightning guard unit «LGU-4»
