4
PARTS & TOOLS CHECK LIST
The following tools are recommended for this installation.
Rotary Hammer Drill With 3/8”
Concrete Drill Bit
Caulking Gun & Silicone
Safety Goggles
Leather Gloves
Hand Level
9/16” Wrench or
Adjustable Wrench
Drill the Corner Anchor Bolt Hole
Insert the Wedge Anchor Bolt
Start by placing a Deflector Shield up against the baffle wall. Using a
Marker, mark a corner pre drilled hole located on top of the deflector
shield. Next, Drill the anchor bolt hole using a Rotary Hammer with
a 3/8” Drill Bit. Careful not to drill through the wall.
After Drilling the Corner Anchor hole, insert a 3/8” wedge anchor
bolt. Using a Power Drill with a 9/16” Socket, fully tighten the anchor
bolt to fully secure the Deflector Shield.
1.
2.
Step 1 - Installing the Deflector Shields
Impact Drill with 9/16” Deep Socket
& 3/8” Magnetic Tip Socket.
Marker
1/2” Step Bit
