INSTRUCTIONS
11
Secure the bottom Louver Ramps using the provided 3/8” wedge
anchors. Fully tighten the anchor bolts using an impact wrench with
9/16” socket. Step 5 is now complete.
Drill the Anchor Bolt Holes
5.
Insert the Wedge Anchor Bolts
6.
Step 6 - Installing the Sliding Doors & the Sliding Door Rails
Attaching the Back Sliding Door Rail
1.
Begin step 6 by placing the Back Sliding Door Rail on top of the
Cages right next to the back Baffle Wall. There are slots located on
the back rail and on the Top of the Cages. Make sure to match both
the left and right slots.
Locate the drilled holes on the bottom ramps. Push the louver ramp
flush with the baffle wall. Drill the anchor bolt holes using a Rotary
Hammer Drill with a 3/8” Drill Bit.
Secure the Sliding Back Rail to the Cages
Using two 3/8” Bolts, one per slot, secure the Back Rail to the Cages.
Secure the bolts using a 9/16” wrench. Fully tighten all bolts on
both the left and right slots.
2.
