Fortek Security Systems
Tel: 1-800-505-6476
www.forteksecurity.com
Fax: 1-866-655-6342
9
1. Enroll a single credential:
To incorporate a new credential to the system.
2. Enroll multiple credentials:
To incorporate a number of credentials to the system.
3. Delete a credential:
To delete a credential in order to prevent unwanted access.
4. Replace a credential:
To delete a lost or stolen credential and enroll a new one.
5. Door monitor activation/deactivation:
Security feature that provides a continuous warning
signal if the door remains open. Door contact installation is required in order to utilize this
feature.
6. Change controller reset Key:
This function allows to setup a unique and easy to
remember reset key for the controller – the controller reset key is used to reset the security
password or reset the controller to manufacturer original settings.
7. Unlocked mode:
To keep the door/s unlocked to grant access to visitors or people who do not
have a credential.
8. Locked mode:
To switch-back from open mode (7) to normal mode (credential holder only)
9. Unlocking time set:
To set the number of seconds that the door will remain unlocked after
presenting the credential onto the proximity reader.
10. Password change:
To change the actual password to a new one.
11. Password reset:
To reset the password back to the default “1234”.
12. Independent doors settings:
To switch the system from Mode 2(enrolled credentials unlock
both doors) to Mode 3 (enrolled credentials can be set to unlock door number 1, door number 2
or both). credentials stored into the system will remain with the same settings.
13. System reset:
To delete all existent users and settings. The system will be back to the factory
settings.
System functions - Operational Mode 2
