Fortek Security Systems
Tel: 1-800-505-6476
www.forteksecurity.com
Fax: 1-866-655-6342
13
8 - Locked Mode
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if the
correct password was entered.
C)
Press key number seven "7" to enter the "locked mode" command.
D)
Enter the door number you want to lock (credential access only),
Enter “1” to lock door number 1
Enter “2” to lock door number 2
Enter “3” to lock both doors
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
9 - Unlocking time set
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if the
correct password was entered.
C)
Press key number eight "8" to enter to the "unlocking time set mode" the green light will
blink once.
D)
Enter the number of seconds you want the door to remain unlocked after the credentials are
presented on the reader, accepted values are between two (2) and nine (9) seconds.
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
10 - Change Password
A)
Press and hold the Escape key [ESC] until a double beep is heard. The orange light will
remain on to indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if the
correct password was
entered.
C)
Press key number nine "9"to enter to the "password change" operation mode, the green light
will blink once.
D)
Enter the four digits of the new password (0-9 digit allowed).
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
