Fortek Security Systems
Tel: 1-800-505-6476
www.forteksecurity.com
Fax: 1-866-655-6342
5
3 - Delete a credential
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if
the correct password was entered.
C)
Press key number two "2" to enter to the "delete credential mode", the green light will blink
once.
D)
Enter the last four (4) digits of the credential you want to delete
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
4 - Replace a credential
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered the programming mode.
B)
Enter the 4 digit security password – factory default:1234.. The green light will blink twice
if the correct password was entered.
C)
Press key number three "3" to enter to the "replace credential mode", the green light will
blink once.
D)
Enter the last four (4) digits of the credential you want to replace
If the deletion was successful, the system will beep twice; the green light will blink once and will
remain on indicating that the new credential has to be presented on the reader.
E)
Present the new credential over the proximity reader, if the operation is successful the light on
the reader will blink twice, turning from red to green, indicating the credential was successfully
incorporated into the system.
5 - Door monitor activation/deactivation (door contact installation required)
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Enter the 4 digit security password – factory default:1234. The green light will blink twice if
the correct password was entered.
C)
Press key number four "4" to enter the "door monitor activation/deactivation” command. If
the door monitor was deactivated it will activate it, if it was activated it will deactivate it. If the
operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
