Fortek Security Systems
Tel: 1-800-505-6476
www.forteksecurity.com
Fax: 1-866-655-6342
14
11- Reset Password
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Press Enter "ENT" key, the green light will blink once.
C)
Press key number seven "7" to enter to the “password reset mode”, the green light will blink
once.
D)
Enter the factory default reset key ‘4812446’ or your unique 7 digits controller reset key.
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds. After this operation, the password will be reset to “1234”
12 – Independent door Set/Unset (Switch mode 2-->mode 3)
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Press Enter "ENT" key, the green light will blink once.
C)
Press key number nine "8" to enter to the "independent doors" operation mode, the green
light will blink once.
D)
Enter the seven unique digit password provided with the access system controller. If the
operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
Once the operation is completed, when new credentials are enrolled, it will be required to define
authorized door/s number (Mode3). Please from this moment refer to operational instruction for
mode 3 to perform management operations
13 – System Reset
A)
Press and hold the Escape key "ESC" until a double beep is heard. The orange light will remain
on to indicate you have entered into the programming mode.
B)
Press Enter "ENT" key, the green light will blink once.
C)
Press key number nine "9" to enter to the "system reset" operation mode, the green light will
blink once.
D)
Enter the factory default reset key ‘4812446’ or your unique 7 digits controller reset key.
If the operation was successful, the system will beep twice and the green light will remain ON for 3
seconds.
Once the operation is completed, all the users and settings will be deleted, the password will be
reset to “1234”; and the system will be reset to factory settings.
