Registering the ECSPKY to a Hub
Make sure the control panel is in Connection Mode
Press Arm [ ] or Home Mode [ ] on the keypad to unlock it.
Type your user code or admin code on the keypad, and then
press any of the Arm [ ], Disarm [ ] or Home Mode [ ] keys.
You will hear a short bleep if successful.
Default admin code: 123456
Default user code: 1234
The control panel of your alarm system can be controlled from a
distance from the keypad, once it has been successfully
registered.
Registering RFID tags
1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it.
Then type [admin code + “#”] to enter setup mode.
Default admin code: 123456
If you hear 2 beeps, the code you have entered is incorrect.
2. Type [41#]. You hear one beep and the LED indicator light sup: the
keypad switches to Connection Mode.
3. Swipe the RFID tag in front of the RFID reader. You should hear one
bleep; the connection is successful.
If you hear two bleeps, the RFID tag has already been added.
Press [*] to exit Setup Mode.
To clear all registered tags, press either the Arm [ ] or Home [ ] keys on the
keypad to unlock it, and then type [admin code + #42]. You will then hear
one bleep; the RFID tags have been deleted from the keypad
