Fort ECSPKY, Manual, Page: 13 / 15

Changing Codes
Change User Code
1. Enter setup mode
2. Type [
38 +
new user code
+ #
]
3. You hear one bleep: the setup is successful
Note: The user code must be 4 digits. Default user code is “1234”
Change Admin Code
1. Enter setup mode.
2. Type [
39 + new user code + #
]
3. You hear one bleep: the setup is successful
Note: The admin code must be 4 digits. Default user code is “123456”
Reset
1. Enter setup mode.
2. Type [
987654321#
]
3. You hear one bleep: the setup is successful
Note: After having reset the kepad, the user code, the admin code, and any other settings will be
restored to default settings. Any programmed RFID tags will not be deleted.