Settings
Enter Setup Mode
Press Arm [ ] or Home Mode [ ] on the keypad to unlock it.
Type [
admin code
+
#
] to enter Setup mode.
Default admin code: 123456
Under setup mode, if no operation is made for 30 seconds, the keypad will
exit the setup mode automatically. The setup mode can also be exited by
pressing [
*
].
Exit delay
Detectors start detective potential intrusions immediately after the system
has been armed. To prevent alarms when you leave the property, an exit
delay can be set up. If you have set up an exit delay, the control panel will
receive the signal to arm the system when you press the Arm key [ ] on the
keypad after the time set.
1. Enter Setup Mode.
2. Type [
33
+
delay time in seconds
+
#
].
3. You hear one bleep; the setup is successful.
To deactivate the Exit delay, set 0 as the delay time.
Note:
The time is set in seconds, which ranges from 0 ~ 255 seconds, default
setting 0
If the exit delay has been set, the control panel will bleep once every
seconds after having pressed the Arm [ ] key. The rhythm of the bleeps will
speed up during the last 15 seconds. After the exit delay has elapsed, the
control panel is armed.
If an exit delay has been set up for both the control panel and the keypad,
the actual delay time will be the combination of both exit delays.
