Usage
The keypad can be used as a remote control. Your user code or your
admin code will be required before arming or disarming the system, or
switching to home Mode or Mute Mode.
Arm the System
1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it
2. Type your user code or admin code.
3. Press the Arm key [ ]. The LED indicator flashes once, the keypad
bleeps once and sends the arming signal to the system.
Default admin code: 123456
Default user code: 1234
Disarming the system with the keypad
1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it.
2. Type your user code or admin code.
3. Press the Disarm button [ ]; the LED indicator flashes once, the keypad
bleeps once, and sends the disarm signal to the system
Default admin code: 123456
Default user code: 1234
Disarming by RFID Tag
1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it.
2. Press [
*
] to activate the RFID reader for 10 seconds.
3. Within the next 10 seconds, swipe the RFID tag in front of the reader to
disarm the system.
The RFID reader turns off when a tag is swiped in front of it, when the [
*
]
key is pressed again on the keypad, or after 10 seconds without operation.
