10
WWW.FORNEYIND.COM
Primary (Input) Volts
0-12 VDC
Maximum Output Amperage
300A (DC output only)
Rated Output and Duty Cycle
220A @ 60%
Supplied Drive Roll
0.035” and 0.047” Grooves
Recommended Wire Size
0.035” (Compatible with 0.030 - 0.047”)
Wire Speed
1000 IPM Max
Recommended Material
Aluminum and Stainless Steel Alloys
Coolant Type
Air
Dimensions
18” (462mm) X 9.3” (236mm) X 2.7” (70mm)
Cable Length
25’ (7m)
Consumables
TWECO Style Series 14H
Weight
8 lbs (Including Power Cable)
BE SURE TO LOCATE THE SPOOL GUN ACCORDING TO THE FOLLOWING GUIDELINES:
• In areas free from moisture and dust;
• In areas with ambient temperature between 30° to 90°F;
• In areas free from oil, steam and corrosive gases;
• In areas not subjected to abnormal vibration or shock;
• In areas not exposed to direct sunlight or rain;
• Place at a distance of 12” or more from walls or similar obstructions that could restrict natural air flow for cooling.
Since the inhalation of welding fumes can be harmful, ensure that the welding area is effectively ventilated. See the
“Safety Summary” for more details (pages 5-9).
FOR YOUR SAFETY, BEFORE CONNECTING THE POWER SOURCE TO THE LINE CLOSELY
FOLLOW THESE INSTRUCTIONS:
•
An adequate two-pole breaker must be inserted before the main outlet. This breaker must be equipped with
time-delay fuses.
•
When working in a confined space, the welder must be kept outside the welding area and the ground cable
should be fixed to the workpiece. Never work in a damp or wet confined space.
•
Do not use damaged INPUT POWER CABLE or welding cables.
•
The welding gun/torch/electrode should never be pointed at the operator or other people.
•
The welder must never be operated without its panels attached. This could cause serious injury to the operator
and could damage the equipment.
Installation
Spool Gun Specifications
Site Selection
Additional Warnings
Ventilation
