Installation and Operating Manual
HOBS
20
A – 760 mm
B – 50 mm (min)
C – 20 mm (min)
D – Air input port
E – Air output port 5 mm
Before proceeding with the installation of
the hob, please, make sure that:
•
the countertop is rectangular and flat,
suitable for installation of the hob;
•
the countertop is made of temperatu-
re-resistant material;
•
in the event that the hob is installed
above the oven, the oven is equipped
with the cooling fan;
•
the place intended for the hob in-
stallation, meets all the dimensional
requirements, current regulations and
safety standards;
•
suitable mains on/off switch is instal-
led as part of the wiring and ensures
full disconnection of the hob from
mains; the switch, the method of its
installation, connection and wiring are
in full conformity with local electrical
safety regulations.
The input switch must be of approved type
and ensure at least 3 mm gap between open
contacts on each AC phase (or on each acti-
ve wire, provided your local electrical safety
regulations permit this kind of connection).
Make sure further, that:
•
after the hob is installed, the mains in-
put switch remains easily accessible;
•
in case you have any doubts as to the
installation of the hob, please, het in
contact with local technical supervisi-
on authority;
•
you use temperature-resistant and
ease-to-clean finishing materials
(such as ceramic tiles) to finish the
walls around the hob.
When the hob is installed, make sure,
that:
•
power cable cannot be accessed
through furniture doors and drawers;
•
sufficient fresh air intake to the hob is
provided outside the kitchen furniture;
Summary of Contents for PVA 60 CREAZIONE
Page 29: ...Installation and Operating Manual HOBS 27...
Page 30: ...Installation and Operating Manual HOBS 28...
Page 31: ......
Page 32: ...www fornelli tech com...