Installation and Operating Manual
HOBS
12
2. Touch the timer button, figure “00” will be displayed in the tim-
er display, while figure “0” will be blinking.
3. Set the timer using “+” and “–“ buttons (for example, to “5”).
4. Touch the timer button again; figure “0” will start blinking.
5. Set the timer using “+” and “-“ buttons (for example, to “9”);
now the timer is set to 95 minutes.
6. After the time is set, the countdown will start. The remaining
time will be displayed on the timer display.
NOTE:
Red dot will light up near the power level indicator, thus indi-
cating that this heating zone is selected.
7. Upon expiry of the set time corresponding burner will be
switched off. Other burners, which have been switched on ear-
lier, will keep working.
If You Need to Set the Timer
for Several Induction Burners
1. When you set the timer for several burners at one and the
same time, several red dot lights will lit near the correspond-
ing power/heating level indicators. The minute display will be
showing the minimum set time. The red dot indicator of the
corresponding heating zone will be blinking.
(timer on 15 minutes)
(timer on 45 minutes)
Summary of Contents for PVA 60 CREAZIONE
Page 29: ...Installation and Operating Manual HOBS 27...
Page 30: ...Installation and Operating Manual HOBS 28...
Page 31: ......
Page 32: ...www fornelli tech com...