Fornelli FEA 45 SONATA, User Manual

Page: 7 / 24

Installation and operation instructions Installation and operation instructions
OVENS
5
CONTROL CONSOLE
1. The push-pull* mode selection switch is
used to select a cooking mode desired.
2. The electronic programmable device en-
ables to set actual time, cooking duration
and end of cooking. In some models it can
also be used as a timer.
3. The push-pull* temperature selector
(thermostat) is used to set a tempera-
ture value required for cooking (tempera-
ture values ranging from 50ºC to 270ºC).
The values of temperatures are indicated
around the selector.
4. The heating elements operation control
lamp (to indicate whether the heating ele-
ments are on / off to keep a chosen cook-
ing temperature). The feature is conve-
nient for preheating the oven. You select
a temperature value, required for prepara-
tion of your dish, switch on the oven and
start cooking after the control lamp is off.
The lamp being off means the oven has
been preheated to the temperature you
have selected.
OVEN CONTROL ELEMENTS
Your new oven has a multifunction system
used for preparation of food. This enables to
select the best cooking mode for a dish you
wish to cook. The mode required may be se-
lected with switches on the control console.
To decrease the temperature of the exter-
nal surface of the oven, built into a piece of
kitchen furniture, the models are equipped
with a cooling fan which is on, with any mode
OVEN OPERATION
* The control knob is recessed into the console. To set a value required, you should do the fol-
lowing: press the knob to move it up, set a value desired, turning the knob clockwise / coun-
terclockwise. Then, press the knob again to recess it.
MAX
60
80
100
120
140
160 180
200
220