Fornelli FEA 45 SONATA, User Manual

Page: 15 / 24

Installation and operation instructions Installation and operation instructions
OVENS
13
CATALYTIC PANELS
Onto the surface of the farther wall of the
oven a layer of self-cleaning, catalytic enam-
el is applied. Self-cleaning carries during the
oven operation. But in fact, some badly-burnt
stains can only be removed upon repeated
operation of the oven.
Residues of flavors can easily be removed us-
ing a soft cloth or a brush.
Slight changes to the enamel color have im-
pact upon its self-cleaning properties.
OVEN CARE
Attention!
Before cleaning, wait till the oven
cools down. Disconnect the oven,
unplugging it or tripping the switch.
Do not clean the appliance using steam, do not
practice power wash.
It would be fair enough to wipe the external sur-
face of the appliance with a piece of wet cloth.
If this is not sufficient, use a detergent agent
or warm soapy water. With severe contamina-
tions, not being removed by means of ordinary
detergent agents, use special-type cleaning
foam for ovens. Cleaning agents shall be only
applied onto enameled surfaces.
In no circumstances use abrasives because
they leave scratches and dead spots. If you
happened to accidentally use them, wash them
off with water immediately.
Baking pans can be washed with a soft
sponge, using a dishwashing detergent, or in
a dishwasher. To wash chrome-plated guides
for baking pans also use a dishwashing deter-
gent and a soft sponge. To remove badly-burnt
stains use a harder sponge. Upon cleaning,
wipe the surface with a dry piece of cloth.
For easier cleaning you may take off the oven
door (Figure 4).
For that, fully open the door. Snap the hook “B”
of the door hinge “A” from its normal position
to the rearmost one, on both hinges. Open the
door in such a way so that the hooks “B” bump
up against the edge of recess in the oven door.