Formosa XG-520, User Manual

Page: 28 / 60

28
Wireless Access Control Mode : Select the Access Control Mode
from the pull-down menu.
•
Disable : Select to disable Wireless Access Control Mode.
•
Allow Listed : Only the stations shown in the table can
associate with the AP.
•
Deny Listed : Stations shown in the table won’t be able to
associate with the AP.
MAC Address : Enter the MAC address of a station that is allowed to
access this Access Point.
Comment : You may enter up to 20 characters as a remark to the
previous MAC address.
Apply Changes : Press to save the new settings on the screen.
Reset : Press to discard the data you have entered since last time you
press Apply Changes.
Current Access Control List : This table displays you the AP MAC
information.
Delete Selected : To delete clients from access to this Access Point,
you may firstly check the select checkbox next to the MAC address
and Comment, and press
Delete Selected button.
Delete All : To delete all the clients from access to this Access Point
just press Delete All button without selecting the checkbox.
Reset : If you have made any selection, press Reset will clear all the
select mark.
WAN Port
Click Setup to enter the WAN Port Configuration screen.