Formosa XG-520, User Manual

Page: 20 / 60

20
Wireless Access Control Mode : Select the Access Control
Mode from the pull-down menu.
•
Disable : Select to disable Wireless Access Control
Mode.
•
Allow Listed : Only the stations shown in the table can
associate with the AP.
•
Deny Listed : Stations shown in the table won’t be able
to associate with the AP.
MAC Address : Enter the MAC address of a station that is
allowed to access this Access Point.
Comment : You may enter up to 20 characters as a remark to the
previous MAC address.
Apply Changes : Press to save the new settings on the screen.
Reset : Press to discard the data you have entered since last time
you press Apply Changes.
Current Access Control List : This table displays you the AP
MAC information.
Delete Selected : To delete clients from access to this Access
Point, you may firstly check the select checkbox next to the
MAC address and Comment, and press
Delete Selected button.
Delete All : To delete all the clients from access to this Access
Point just press Delete All button without selecting the
checkbox.
Reset : If you have made any selection, press Reset will clear all
the select mark.
WDS Setting If you select the mode into WDS Repeater mode, then you can
access the WDS Setting setup.