Formosa XG-520, User Manual

Page: 13 / 60

13
Access Point
In this mode, all Ethernet ports and wireless interface are bridged
together and NAT function is disabled. All the WAN related function
and firewall are not supported. The wireless mode is AP mode.
Gateway
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PCs in LAN ports share
the same IP to ISP through WAN port. The connection type can be setup
in WAN page by using PPPoE, DHCP client, PPTP client or static IP.
Client
If set to Client (Infrastructure) mode, this device can work like a wireless
station when it’s connected to a computer so that the computer can send
packets from wired end to wireless interface.
Access Point Mode
AP Mode Settings
Alias Name
The name of this device. You can assign a name for this router to
distinguish form other APs.
Band You can choose one mode of the following you need.
~
2.4GHz (B): 802.11b supported rate only.
~
2.4GHz (G): 802.11g supported rate only.
~
2.4GHz (B+G): 802.11b supported rate and 802.11g
supported rate. The default is 2.4GHz (B+G) mode.
SSID The SSID differentiates one WLAN from another; therefore, all
access points and all devices attempting to connect to a specific