I
Appendix A : WCOMW Usage
A.1
Prepare To Use WCOMW
1.
Connect COM2 port (or one empty serial port) in PC and COM1 port of 3A-100 SERIES via an RS-232 Cable (come with
3A-100 SERIES).
2.
Insert the Setup Disk come with 3A-100 SERIES into your floppy driver and copy all of those files to a directory of the PC
and unzip the TeleWriter.zip.
3.
Launch WCOMW.EXE on PC (double click on the icon of that file while you are in Windows 98 File Explorer)
4.
If you are using other COM port of your PC to connect 3A-100 SERIES, please select it from File Menu.
A.2
Set IP address under Network Mode
1.
If you have press X in loader menu and keep the RS232 cable connected, jump to 3.
2.
Prepare the configuration as indicated in B.1, then power on 3A-100 SERIES.
3.
Wait until you see this menu as follows:
---- Network Mode Configuration Menu -----
[1] Set IP/Subnet Mask/GW
[2] Set Registry Server (IP/Domain/Path)
[X] Exit
Choose?
Press 1 to set IP address, subnet mask and the gateway IP address for 3A-100 SERIES. A valid and unused IP address is
required.
Press 2 to set the parameters for registry server, please reference section 3.8.8.
Press X to exit and continue to boot.
Remove the RS-232 cable from 3A-100 SERIES.
awired
com
3
Summary of Contents for 3A-100 Series
Page 11: ...7 awiredcom 3...
Page 56: ...II awiredcom 3...
