16
1.
Select “Network Status” -> “WAN IP status” to bring up Fig 7. This screen gives you indications of the outgoing ADSL
network status. When connection is built successfully, you can see the “PPPoE connection time”, ”IP Address”,
“Subnet Mask”, “Gateway”,” Primary” and “Secondary” DNS Server etc….
2.
If the ADSL connection is fail, you will NOT get the above data on 2.2.6.1 and there will be “NOT CONNECTED” in
the “PPPoE connection time” field. Then you will have to check cabling between ADSL modem and IP sharing router,
ADSL ISP account and password etc…
Session List:
1.
Select “Network Status”
“ Session List” to see network activities as the following figure.
2.
If there are connections from outside world or inside local LAN, their IP addresses and port numbers will be
shown on the list.
3.
This finishes IP sharing router configuration!
2.7.2 Not Running PPPoE Protocol
For DSL or Cable Modem not running PPPoE, users are free to connect 3A-100 SERIES with
xDSL/Cable Modem directly
without any other device.
1.
For static IP case:
If a static public IP is assigned to the xDSL/Cable Modem account, just assign this IP to 3A-100 SERIES as the following
figure.
DSL/Cable
Modem
3A-100
awired
com
3
Summary of Contents for 3A-100 Series
Page 11: ...7 awiredcom 3...
Page 56: ...II awiredcom 3...