11
Note:
About DHCP, IP forwarding, Virtua l Server parameters setting, please
refer to the following explanation.
2.6.3 Browse and view the video
Users can view the live video by click the IP address now, a nd the operations of ISP mode are the same as Network mode.
2.7 Use 3A-100 SERIES with DSL or Cable Modem
Users can connect 3A-100 SERIES to a DSL or Cable Modem via an Ethernet cable to the RJ-45 port of 3A-100
SERIES, as they will do to their PC. Since 3A-100 SERIES
does not support PPPoE, users have to check out if their
DSL/Cable Modem running PPPoE. Each phase of the documented installation procedure is summarized below:
2.7.1 Running PPPoE Protocol
2.7.2 Not Running PPPoE Protocol
2.7.1 Running PPPoE Protocol
For DSL or Cable Modem running PPPoE, since 3A-100 SERIES does not support PPPoE,
an external device is required.
The most common device is a Cable/DSL router with built-in NAT function that supports PPPoE. The configuration is as the
following figure.
If users connect 3A-100 SERIES via DSL
/Cable modem over PPPoE protocol, please follow the following steps to install
the device.
1.
For static IP case:
When connecting 3A-100 SERIES via DSL
/Cable modem over PPPoE protocol, if a static IP address is assigned for
3A-100 SERIES, users have to set DHCP server, IP forwarding
(or Virtual Server) function, but don’t set registry server.
After setting these parameters, users can view the video from 3A-100 SERIES via this static IP address directly.
DSL/Cable
Modem
DSL/Cable
Router
PC
PC
Note:
1. For dynamic IP, users must check the IP address for the registry host
to
find out the assigned dynamic IP.
2. DNS IP address must be correctly configured for 3A-100 SERIES to
register itself to a registry server.
3A-100
awired
com
3
Summary of Contents for 3A-100 Series
Page 11: ...7 awiredcom 3...
Page 56: ...II awiredcom 3...