39
4. Setting general parameters :
Standard -- “AUTO”, 3A-100 will de
tect video input to this channel automatically.
It can be manually set as “NTSC”,
“PAL” or “SECAM”.
Frame Rate –
The frame rate ranged from 1 to 30. You can set the frame rate
you want for each camera. But the total frame rate adds up to all cameras will be limited by overall system performance.
Frame rate
0 stands for maximum video refresh rate.
Brightness -- The higher value ,the brighter of the video
Contrast
-- The higher value, the stronger contrast
Saturation -- The higher value, the more color saturation
Hue
-- The higher value, the higher hue
Quality
-- Higher value, better video quality
Note:
1. The value of “
Quality
” applies to all video sources. That of brightness, contrast, saturation and hue applies to the
selected camera only.
2. Please choose one global brightness value carefully among cameras attached and then set Gain values for each camera
individually.
Note:
Higher value of quality level makes heavy data rate for both storage and transmission.
Compression Boost --
Users can select “None”, “Low”, “Medium” and “High” value to adjust the compression rate. The higher
compression boost , the lower video data rate . High compression may affect the video quality.
Auto Gain Control
-- Check to enable auto gain control for this camera.
Gain Value
-- Set gain value for this camera. The GAIN ranged from 0 to 100.
Mirror Horizontally
-- Mirror the selected video viewing from left to right
Or right to left.
Mirror Vertically
-- Mirror the selected video viewing up side down or down
side up.
Max connections for this camera
-- Limit the maximum connections
allowed to access this camera.
Max bandwidth for this camera (Bytes/sec)
-- Limit the maximum
Fig 4.6.2
awired
com
3
Summary of Contents for 3A-100 Series
Page 11: ...7 awiredcom 3...
Page 56: ...II awiredcom 3...